vblock.gif, 0 kB Home
vblock.gif, 0 kB News vblock.gif, 0 kB Company vblock.gif, 0 kB References vblock.gif, 0 kB Jobs vblock.gif, 0 kB Contact vblock.gif, 0 kB Sitemap
vblock.gif, 0 kB Cable Assembly
vblock.gif, 0 kB Connector Assembly
vblock.gif, 0 kB Quality Assurance
vblock.gif, 0 kB Product Information
vblock.gif, 0 kB Transfer System
vblock.gif, 0 kB Customer Solutions
vblock.gif, 0 kB Services
vblock.gif, 0 kB PRO Twist 1000
hblock.gif, 0 kB PRO Twist Basic

Suchbegriff eingeben

Deutsche Version

PRO Twist Basic

Twisting of single strands –
now also available with the latest


zum ausdruck in neuem fenster öffnen Artikel per Email verschicken

+ Twisting of two insulated, crimped, single cables – or single  
   cables with already assembled seals

+ Special, customer specific solutions available
    (e.g. special  housing)

+ Quick and effortless adjustment for various cable
    cross-sections – no tools required

+ Keypad and display allow the easy handling/adjustment of
    equipment, incl. counter

+ 99 product-specific configurations programmable, incl. the
    adjustable amount of revolutions (forward-/reverse-operation)

+ Flat clamping devices with special coating
   (gentle on production material)

+ High production speed with reproducible and steady quality

+ High flexibility through modular design for different applications


Available Equipment:  Options:
 PRO Twist Basic A        

Tension carriage for standard length up
    to 2,5m (98.43 in.)

Tension force by spring force   Tension carriage for cable length up
    to 5m (196.85 in.)
(PRO Twist Basic A) 


 PRO Twist Basic B   + Cable guidance for cable length
    greater than 2m (78.74 in.)

Pneumatic tension force and strain relief

  +  Different clamping devices for various
     isolation - material(s)

 Latest Innovations and their exceptional advantages :

Pneumatic tension force and strain relief: The PRO Twist Basic can be delivered with the well known spring tension carriage – as introduced in PRO.EFF’s Standard Twister in thepast, or the pneumatic tension force and strain relief carriage. The advantage of the pneumatic tension force and strain relief carriage is that the strands are not exposed to the usual experienced tension force during the loading/unloading process. Therefore, no damages to strands or crimping contacts will occur. Further on, the adjustable tension force (required tension force during the process) will only be applied once the process was started. With this latest innovation it is now possible to apply a similar tension force control – as introduced with the PRO Twist 1000.

Twisting head: The twisting head is constructed allowing the quick adjustment to various cable cross-sections and open-end strands, without the usage of any tools. Possible damages on delicate insulations are avoided with the implementation of the latest flatclamping device – available with different coated connecting clamps.

 Integration retaining belt on motor side: The latest integrated retaining belt avoids the unintensional twisting of the twisting head during the loading/unloading process and therefore simplifies this process for the operator. This approach results in a more ergonomic operation, but also a reduced cycle time.

 Technicial Spezification

Cross Sectional area   0,13 mm² - 2,5 mm², von 26 - 13 AWG
 Quantity of cable strads  

2 (more up on request) 

Max. cable lenght (before twist)   2500 mm (optional 5000 mm)
(98.43 in. (optional 196.85 in.))
Min. cable lenght (before twist)   340 mm (13.39 in.)
Special solution - reduceable to approx.   ca. 100 mm (3.94 in.)
Max. lenght open cable end (not wired)   120 mm (4.72 in.)
Min. lenght open cable end (not wired)   60 mm (2.36 in.)
Revolutions /min   100 to 1000 (programmable) 
Quantity of revoulutions   1 to 999 (programmable) 
Electricial connection   1 P/N/PE AC 110-240 V, 50/60 Hz, 100W 
Temperature    +5°C to +40°C (+41°F to + 104°F)
Dimension driving side (L x W x H)   645  x 160  x 160 mm (25.39 x 6.30 x 6.30 in.) 
Dimension tension carriage (L x W x H)
+ Spring force - standard
+ Spring force - for lenght up to 5 m (196.85 in.)
+ Pneumatic - standard
550 x 60 x 130 mm (21.65 x 2.36 x 5.12 in.)
1350 x 160 x 100 mm (53.15 x 6.30 x 3.94 in.)
630 x 165 x 180 mm (24.80 x 6.50 x 7.09 in.)
Weight driving side   11,0 kg (24.25 lb.)
 Weight tension side
+ Spring force - standard
+ Spring force - for lenght up to 5 m (196.85 in.)
+ Pneumatic - standard
3,7 kg (8.16 lb.)
16,5 kg (36.38 lb.)
7,5 kg (16.5 lb.)
 CE Confirmity / EG-Community Directive / EMV-Standards 



    Data sheet: