Krematec – Equipment for crematoria and cremations
Krematec offers high-quality and reliable equipment for crematoria. Our products are specifically designed for this application. Our aim is to optimize work processes and ensure safe and easy handling. The CE mark on PRO.EFF products confirms that our products are manufactured in accordance with the applicable EC directive.
Ash grinder KREMATEC MH 100
Developed for processing ash in crematoria
The prepared ash is fed into the KREMATEC MH 100 ash grinder. The highly stable grinder crushes the ash. Precious metal residues can then be sorted out and deposited in a locked, secured drawer. The ground material and resulting ash dust are fed into the urn by a vacuum-guided extraction system via a cyclone unit.
Your advantages
- Low-wear manganese steel grinder
- Ground material and ash dust are fed into the urn via a cyclone
- Low-dust work for employees thanks to vacuum-guided extraction system
- Efficient precious metal sorting, can be deselected
- Processing time of approx. 2 to 3 minutes (depending on filling quantity)
- For all known ash boxes, for all commercially available urns
Technical data
Dimensions (WxDxH): 900 (830) x 1470 x 1860 mm
Connection: 3/N 400 V~/ 50 Hz
Power: 4.1 kW incl. industrial vacuum cleaner
Compressed air: 6 bar
Weight: approx. 1100 kg
Ash sorting unit
Time-saving, safe and dust-free work
The division of the sorting unit provides a clearly arranged workstation. Further advantages are the workplace lighting, extraction unit and an integrated filter system. Ash sorting is carried out in a single work step and enables ergonomic working in accordance with the safety requirements of VSG 4.7 of the employers’ liability insurance association. The electronic control is fully integrated and the appliance is started by pressing the start switch on the appliance once.
Features:
- Clearly arranged workstation thanks to the division of the sorting table
- Workplace lighting
- Suction unit and an integrated filter system
- Ergonomic working
- 3 modules: Ash sorting table, extraction unit, blower housing with shelf
Technical data:
Sorting unit: W/D/H 2710/850/1990 (mm)
Weight: approx. 600 kg
Connection: CEE 400 V / 50-60 Hz / 16 Amp.
Nominal air flow rate: 2,200 m3/h Stat. pressure 800 Pa
Urn management system
For scheduled processing of the process list
The urn label is created at the start of the process in order to properly assign and label the ash capsule. These labels are attached to the urn lids according to the order of the process list. The fireclay bricks are also assigned to the matching urn lid. The urn management system provides a filing system to maintain the order of cremations. The urn capsule is removed from the ash mill after the grinding process. This is then sealed with the firebrick and the lid already marked.
Advantages:
- Sufficient storage space
- Structured process
- Lighting
- Integrated storage
- Flexibility
Technical data:
- Standard table dimensions: W/D/H 2000/700/2000 (mm)
- Storage space for consumables: urns, lids, firebricks, adhesive labels, tools
CREMA-Lift 125/400
Coffin lifter with lifting capacity up to 400 KG
This coffin lifter has been specially developed for loading and unloading funeral and transfer vehicles. It is also suitable for daily coffin handling in funeral homes, crematoriums, cemetery chapels or hospitals.
The CREMA-Lift 125/400 enables coffins to be moved daily by just one person in a gentle working position, thus minimizing the risk of back and joint damage.
Features:
- Easy lifting, lowering and moving of coffins with just one person
- Simple operation
- Buffered round bars to prevent damage to the coffin
- Aesthetic appearance that does justice to the funeral environment
Technical data:
Height: 178 cm
Width: 95 cm
Length: 227 cm
Weight: 430 kg
Connection: 220 V 50 Hz
Max. lifting load: 400 kg
Max. lifting height: 135 cm
Min. lifting height: 21 cm
Ash tracking
Traceability system for seamless tracking of ash
- Checking and documenting the status of cremation
- All relevant data is provided with processes to ensure error-free processing
- Data is recorded in the management software and assigned a unique cremation number
- EÄ number is linked to ash box ID, which is located in an RFID chip
- Each box has a unique ID and is linked to the cremation number until the ashes are placed in the urn
We are here for you!
Do you have any questions or requests?